A.clearance
B.crush
C.pitch
D.thrust
您可能感興趣的試卷
你可能感興趣的試題
A.bottom blow the boiler
B.treat the water with caustic soda
C.treat the water with chemical scavengers
D.reduce the water alkalinity to recommended readings
A.reduce gas flow turbulence
B.prevent exhaust gas corrosion
C.increase the rate of combustion
D.increase the rate of heat transfer
A.reduce air charge turbulence
B.induce air swirl
C.deflect hot combustion gas away from the valves
D.oppose the effects of piston induced squish
A.fuel oil vapor at the sludge tank vent
B.unburned fuel vapors in the scavenge air receiver
C.lube oil vapors in the crank case
D.lube oil vapors in the engine room
A.during the valve overlap period
B.with only the exhaust valve open
C.at a pressure below atmospheric
D.without cooling the cylinders or pistons
最新試題
Control of the main propulsion diesel engines can be shifted from the engine room to the wheelhouse from the （）.
Diesel engine control can be obtained by the bridge （）.
A diesel engine piston ring face is in direct contact with the （）.
For a given size engine, the two-stroke/cycle diesel engine will deliver more power than a four-stroke/cycle diesel engine because （）.
The minimum speed an engine must attain before ignition can occur depends upon （）.
Proper filtering and straining of fuel oil is important because the （）.
Combustion knock can occur in the cylinders of a diesel engine under any condition permitting （）.
A thrust bearing is used with a propulsion diesel engine to （）.
If the water level dropped rapidly in the expansion tank of a closed diesel engine cooling water system, you should suspect a （）.
A diesel engine is operating with excessively high exhaust temperatures at all cylindersTo correct this condition, you should FIRST （）.