A.The cable lifter
B.The hoisting motor
C.The topping wire
D.The life-raft
您可能感興趣的試卷
你可能感興趣的試題
A.stays
B.winches
C.barrels
D.brakes
A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
最新試題
Which of the listed pumps is NOT a positive displacement pump?()
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
A grease gun is generally used to lubricate a ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
Low compressor head pressure in a refrigeration system can be caused by().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
The usual symptoms of cavitation in a centrifugal pump is ().
The major source of chemical contaminants in hydraulic fluid is ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()