A.built up propeller
B.solid propeller
C.controllable pitch propeller
D.suction back propeller
您可能感興趣的試卷
你可能感興趣的試題
A.ignition temperature
B.flash point
C.flammable range
D.convection index
A.freeze on the expansion valve seat and reduce the flow of liquid refrigerant
B.emulsify the oil in the condenser
C.freeze in the king valve
D.clog the oil trap
A.The colder seawater passing through the condenser tube bundles of the various stages increases evaporator vacuum
B.The amount of heated feed water discharged from the feed water heater after cndenser is increased
C.Fewer non-condensable gases are created by the flow of colder seawater
D.More seawater is allowed to pass through the flint stage overflow weir
A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
最新試題
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
Which of the listed pumps is NOT a positive displacement pump?（）
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
A grease gun is generally used to lubricate a （）.
The output volume of a positive fixed displacement pump can be changed only by （）.