A.within the space concerned
B.outside the space concerned
C.the throttle station
D.within the fire room
您可能感興趣的試卷
你可能感興趣的試題
A.leaking discharge valve
B.jammed suction valve
C.tripped overload relay
D.broken discharge un-loader
A.Liquids should never be transferred between tanks without consulting the dock master
B.If sea valves have been disassembled, all bonnets must be checked for leakage when the ship is re-floated
C.Before re-floating, all sea chest strainers should be verified as having been replaced
D.All of the above
A.In order for a fluid to be pumped, a fluid must be made to flow
B.A substance must be cold in order for it to be pumped
C.The kinetic energy imparted by the pump can be used to force a liquid through a hydraulic system
D.A pump must receive its energy from an external source
A.one size smaller than the pump suction nozzle
B.the same size as the pump suction nozzle
C.one size larger than the pump suction nozzle
D.installed with a short radius elbow at the pump
A.first stage flash chamber
B.second stage flash chamber
C.first stage after condenser
D.second stage distilling condenser
最新試題
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
A pressure drop through the refrigerant liquid line may cause ().
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
Thermostatic expansion valves can be adjusted for ().
The output volume of a positive fixed displacement pump can be changed only by ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().