A.one size smaller than the pump suction nozzle
B.the same size as the pump suction nozzle
C.one size larger than the pump suction nozzle
D.installed with a short radius elbow at the pump
您可能感興趣的試卷
你可能感興趣的試題
A.first stage flash chamber
B.second stage flash chamber
C.first stage after condenser
D.second stage distilling condenser
A.system is low on refrigerant
B.high pressure cutout switch is improperly adjusted
C.discharge valves are leaking slightly
D.discharge valves are leaking excessively
A.leaky discharge valves on the LP cylinder
B.leaky discharge valves on the HP cylinder
C.insufficient intercooler cooling
D.low ambient air pressure
A.one size larger than the pump discharge nozzle
B.the same size as the pump discharge nozzle
C.one size smaller than the pump discharge nozzle
D.installed with a short radius elbow at the pump
A.purge the condenser if the waterside is dirty
B.check for proper water flow through the condenser
C.increase the high pressure cutout setting
D.reduce the cooling water flow
最新試題
A grease gun is generally used to lubricate a （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
The major source of chemical contaminants in hydraulic fluid is （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
Which of the following statements is correct concerning heat transfer?（）
A pressure drop through the refrigerant liquid line may cause （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.