A.leaky discharge valves on the LP cylinder
B.leaky discharge valves on the HP cylinder
C.insufficient intercooler cooling
D.low ambient air pressure
您可能感興趣的試卷
你可能感興趣的試題
A.one size larger than the pump discharge nozzle
B.the same size as the pump discharge nozzle
C.one size smaller than the pump discharge nozzle
D.installed with a short radius elbow at the pump
A.purge the condenser if the waterside is dirty
B.check for proper water flow through the condenser
C.increase the high pressure cutout setting
D.reduce the cooling water flow
A.Red
B.White
C.Blue
D.Yellow
A.the flashing of the feed water
B.the condensation of the saltwater feed
C.air ejectors, eductors, or a separate vacuum pump
D.condensation of the distillate
A.under heavy loads
B.during hot gas defrost
C.under light loads
D.during starting conditions
最新試題
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
A salinity indicator is used to determine the （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.