A.under heavy loads
B.during hot gas defrost
C.under light loads
D.during starting conditions
您可能感興趣的試卷
你可能感興趣的試題
A.Excessive compression in the cylinder
B.A broken intake valve
C.A dirty inlet filter element
D.An improperly adjusted discharge valve
A.Constant tension mooring winch system
B.Hatch cover system
C.Watertight door system
D.Internal combustion engine hydraulic starter system
A.Carbon build up in the piston ring belt
B.Faulty operation of a cylinder un-loader
C.Compressor operation in an area of high relative humidity
D.Lifting of intercooler rebel valve
A.system was overcharged with refrigerant
B.system was low on refrigerant
C.suction valves were leaking slightly
D.relief valve was leaking slightly
A.broken inlet valves
B.broken discharge valves
C.pulsations in the air distribution system
D.overloading of the air distribution system
最新試題
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
When the steering gear is in operation, you should （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
A grease gun is generally used to lubricate a （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
The general purpose of a heat exchanger is to （）.