A.The liquid receiver functions to collect and remove non-condensable gases
B.A thermostatic expansion valve is used to control refrigerated space temperature
C.Refrigerant temperature in an evaporator is directly related to refrigerant pressure
D.Dehydrators must be used continuously in a refrigeration system
您可能感興趣的試卷
你可能感興趣的試題
A.directly increase the pressure of the liquid being pumped
B.directly increase the velocity of the liquid being pumped
C.convert the potential energy of the liquid to kinetic energy
D.separate air from the liquid being pumped
A.overheated compressor bearings
B.excess lube oil viscosity
C.carbon deposits on the compressor piston rings
D.wax crystals forming in the lubricant
A.electric motor
B.volute
C.impeller
D.diffusion nozzle
A.expansion valve to overfeed
B.compressor to knock
C.water regulating valve to fail
D.crankcase drains to plug
A.poor distillate quality
B.reduced evaporator capacity
C.low brine concentration
D.improper vacuum regulation
最新試題
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
A salinity indicator is used to determine the （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
A salinity indicator is used to determine the （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
When the steering gear is in operation, you should （）.