A.freezing point
B.floc point
C.condensing temperature
D.compression temperature
您可能感興趣的試卷
你可能感興趣的試題
A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer
A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side
A.maintain adequate coil back pressure
B.prohibit flashing in the liquid line
C.reduce refrigerant volume in the system
D.reduce compressor discharge line loading
A.maintaining a steadier speed
B.delivering liquids over greater distances
C.operating for longer periods of time
D.producing a smoother discharge flow
A.rolling member size
B.inner race cone width
C.manufacturers numerical code
D.outer ring width
最新試題
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
The general purpose of a heat exchanger is to （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
A pressure drop through the refrigerant liquid line may cause （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.