A.superheated
B.saturated
C.dense
D.flooded
您可能感興趣的試卷
你可能感興趣的試題
A.a separate air ejector unit
B.a direct unimpeded connection between second stage and salt water feed heater
C.either by vacuum drag or an external line from the first stage via a fixed orifice
D.the fixed orifice provided in the steam supply line
A.Expansion valve
B.Evaporator
C.Drier
D.Receiver
A.using a slightly dirty air filter
B.using oil having an excessive viscosity
C.intercooler or after-cooler leaks
D.carrying the oil level higher than normal
A.increased capacity of the compressor
B.more efficient operation of the thermal expansion valve
C.decreased capacity of the compressor
D.loss of receiver capacity
A.damage to the un-loader operating diaphragm
B.an increase in current flow to the motor
C.high pressure in the receiver and filter
D.an excessive consumption of crankcase oil
最新試題
The output volume of a positive fixed displacement pump can be changed only by （）.
A pressure drop through the refrigerant liquid line may cause （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
Low compressor head pressure in a refrigeration system can be caused by（）.