A.Expansion valve
B.Evaporator
C.Drier
D.Receiver
您可能感興趣的試卷
你可能感興趣的試題
A.using a slightly dirty air filter
B.using oil having an excessive viscosity
C.intercooler or after-cooler leaks
D.carrying the oil level higher than normal
A.increased capacity of the compressor
B.more efficient operation of the thermal expansion valve
C.decreased capacity of the compressor
D.loss of receiver capacity
A.damage to the un-loader operating diaphragm
B.an increase in current flow to the motor
C.high pressure in the receiver and filter
D.an excessive consumption of crankcase oil
A.first stage
B.second stage
C.distillate cooler
D.salt water feed heater
A.Gravity siphon effect
B.Higher vacuum in the second-stage
C.Difference in brine density between first and second stages
D.lower pressure in first-stage
最新試題
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
Thermostatic expansion valves can be adjusted for （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
The rate of heat transfer from a hot region to a cold region is affected most by the （）.