A.Distiller air ejector cooling medium
B.Saltwater heater discharge
C.First-stage internal feed box
D.Second-stage internal feed box
您可能感興趣的試卷
你可能感興趣的試題
A.condenser
B.vapor generator
C.accumulator
D.evaporator
A.expansion valve to the compressor
B.receiver to the expansion coil
C.expansion valve to the evaporator
D.condenser to the expansion valve
A.leaking unloader
B.tripped circuit breaker
C.control line leak
D.defective pop valve
A.superheated
B.saturated
C.dense
D.flooded
A.a separate air ejector unit
B.a direct unimpeded connection between second stage and salt water feed heater
C.either by vacuum drag or an external line from the first stage via a fixed orifice
D.the fixed orifice provided in the steam supply line
最新試題
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
The usual symptoms of cavitation in a centrifugal pump is （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
When the steering gear is in operation, you should （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.