A.engine speed
B.engine load
C.intake manifold pressure
D.atmospheric pressure
您可能感興趣的試卷
你可能感興趣的試題
A.glazed liners or pistons
B.high lube oil pressure
C.excessive compression ratio
D.worn valve seats and valves
A.governor droop
B.speeder spring tension
C.fuel rack lag
D.load on the engine
A.a cracked cylinder liner
B.clogged intake ports
C.broken piston rings
D.a faulty head gasket
A.increase the starting air pressure
B.use a higher than normal cranking speed
C.increase the fuel injection pressure
D.use a fuel having a lower ignition temperature
A.soft water pump was not secured along with the engine
B.jacket water thermostat has failed
C.cylinder liner may be cracked
D.raw water pump is over-speeding just prior to engine shutdown
最新試題
The treatment of the fuel oils involves storage, heating, filtering and（）
The cetane rating of diesel fuel is an indication of the （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
If separating effect is not good, which measure should be taken （）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Under MARPOL Code the ship to which it applies has to carry （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）