A.propeller hub
B.lignum vitae
C.shaft packing
D.labyrinth seal
您可能感興趣的試卷
你可能感興趣的試題
A.liquid
B.dry saturated gas
C.wet saturated gas
D.superheated vapor
A.closed, and no leakage permitted across the shaft packing
B.closed, and only slight leakage permitted across the shaft packing
C.open, and no leakage permitted across the shaft packing
D.open, and only slight leakage permitted across the shaft packing
A.freezing point
B.floc point
C.condensing temperature
D.compression temperature
A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer
A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side
最新試題
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().
Low compressor head pressure in a refrigeration system can be caused by().
Which of the following statements is correct concerning heat transfer?()
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
A pressure drop through the refrigerant liquid line may cause ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
The general purpose of a heat exchanger is to ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().